Compaq (康柏) Presario 1502SC ROMpaq 驱动程序免费下载(ver. F.­0D A)

在本页面,您可以永久免费下载Compaq (康柏) Presario 1502SC ROMpaq 驱动程序,设备类型为笔记本电脑。

ROMpaq (ver. F.­0D A) MSZIP 发布 2003.05.23。

已被下载0次, 已被浏览754次。

类型 笔记本电脑
品牌 Compaq (康柏)
设备 Presario 1502SC
操作系统 Windows 2000, Windows XP
版本 F.­0D A
文件大小 741 Kb
文件类型 MSZIP
已发布 2003.05.23
寻找并下载

正在寻找Compaq (康柏) Presario 1502SC ROMpaq 驱动程序,并提供下载链接。

正在搜索...
ROMpaq driver for Compaq Presario 1502SC Type: ROMPaq DESCRIPTION: This SoftPaq creates a ROMPaq firmware diskette that can be used to locally restore or upgrade the System ROM in the Presario and Evo models listed below with a 68P4C Family ROM.­ The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer,­ and viewing File/­System Information.­ ENHANCEMENTS: - Updates new PXE boot agent 4.­1.­09.­ - Supports new 32-byte serial number format.­ - Adds support for all Intel D1 stepping processors.­ FIXES: - Fixes issue where L1 cache showed only 16kb instead of 20kb in F10 Setup.­ IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! HOW TO USE: 1.­ Obtain a formatted 1.­44-MB diskette.­ 2.­ Download the SoftPaq to a directory on your hard drive and change to that directory.­ The file that is downloaded is an executable with a filename based on the SoftPaq Number above.­ 3.­ From that drive and directory,­ execute the downloaded file and follow the on-screen instructions.­ You will be prompted to insert the formatted diskette in a drive to create the diskette.­ 4.­ After the diskette has been created,­ you may delete the SoftPaq file downloaded in step 2.­ 5.­ Turn off the computer.­ 6.­ Place the newly created Compaq Presario 1500/­Evo N1000c/­Evo N1000v ROMPaq Diskette in Drive A: and turn on the computer.­ Follow the instructions on the screen to upgrade the System ROM.­

热门笔记本电脑 Compaq (康柏) Presario 1502SC驱动程序:

热门Compaq (康柏) 笔记本电脑驱动程序: